Share this page

EBC 500

5.25" Intel® Core™ 2 Duo/ Core™ Duo/ Core™ Solo Embedded CPU Board with 2 x PCIe GbE LAN/ 1 x PCIe x16
  • Main Feature
  • Supports Intel® Core™ 2 Duo, Core™ Duo & Core™ Solo Processor Family
  • Intel® 945GME Chipsets
  • 2 x 240-pin DDR2 DIMM Sockets Support Un-buffered Non-ECC DDR2 400/533/667 up to 2GB
  • 2 x Intel® 82573L PCI Express Gigabit LAN
  • Supports LVDS/VGA Display
Add to Inquiry
Datasheet(PDF)
CPU Support Intel® Socket M Supports Intel® Core™ 2 Duo, Core™ Duo,Core™ Solo family processors with 533/667 MHz Intel® Embedded Processor List (Intel® Longevity CPU): Core™ 2 Duo Processor (T7400 2.16GHz); Core™ Duo Processor (T2500 2.0GHz); Core™ Solo Processor (Celeron® M 440 1.86GHz)
Main Memory 2 x 240-pin DDR2 DIMM socket, up to 2GB un-buffered non-ECC DDR2 400/533/667 SDRAM * Note: Maximum 4GB. Actual memory size is dynamic based on the OS I/O resource allocation
Chipset Intel® 945GME Graphics Memory Controller Hub (GMCH) Intel® 82801 GHM ICH7 Mobile Digital Home (ICH7-M DH)
BIOS Award system BIOS Supports Soft off, Wake on LAN, Power On by PS2 Keyboard Function Key, RTC alarm Power On Power on after power failure Plug & Play support 4M bits flash ROM
On-board LAN 2 x Intel® 82573L PCI Express Gigabit Ethernet Supports Boot From LAN (PXE) Supports Wake on LAN (When 5Vsb power available). (LAN1 only) 2 x RJ45 with LED
Display ŒŒ Intel® 945GME chipset with integrated graphics controller, Max. 128MB by Intel® Dynamic Video Memory Technology (DVMT) 3.0 Analog VGA interface: 1 x DB15 VGA port Resolution up to 1400X1050 (Tested); Chipset supports up to 2048 x 1536 LVDS interface: 2 x DF13 20-pin LVDS connector for internal connection, supports single (18bit) or dual pixel (36bit) LVDS panel ŒŒ CCFL interface: 1 x CCFL for LCD Panel Backlight Inverter
Audio Realtek ALC655 CODEC for AC'97 v2.1 CODECl Interface: Mic-in and Speaker-out connector, Line-in with pin header
Expansion 1 x PCIe x16 slot 1 x PCI slot
I/O Interface USB 2.0: 2 ports edge connector USB 2.0: 4 ports, by 1x6 2.5mm JST connector Serial ports: 4 x SIO, with 2x20 box header (2.0mm)support RS-232 only 1 x jumper to switch 5V and 12V power source Parallel port: 1 port, with 2x13 box header (2.0mm) PS/2: 1 x Mini-Din Keyboard/Mouse GPIO: Support 4 sets of general purpose I/O each with TTL level (5V) interface FAN: Two 1 x 3-pin connectors for system Fan, one 1 x 4 pin connector for CPU Fan 1 x on-board 5-pin header for IrDA, TX, RX SMBus2.0/Reset/On off switch button
Watchdog Timer Watchdog Timer is programmable by software from 1 to 255 seconds (Tolerance 10% under room temperature 25°C)
Storage 2 x SATA II ports 1 x IDE 44-pin connector 1 x CF internal socket, supports One Type I& II Compact Flash Card (Primary Master)
System Monitor 8 voltage (For +3.3V, +5V, +12V, Vcore and +1.5V, +1.8V, +5VSB, +3VSB) 3 Temperatures (CPU, two external Temperature Sensor) 3 FANs speed (CPU and System FANs)
On-board RTC On-chip RTC with battery back up 1 x External Li-ion Battery RTC Tolerance less than 2sec (24 hours) under 25°C environment
Power Requirements Supports both AT and ATX Mode (Factory default setting is AT mode) CPU: P-M 2.17GHz, Memory: 2 x 1G DDR2(+12 V, +5 V) Full-Loading Mode: 3.25 A, 4.97 A Light-Loading Mode: 0.40 A, 2.97 A NOTE: 1. Full Loading: Utilize CPU 100% with Burn-in test running. 2. Light Loading: Utilize CPU loading below 5% without data or application running.
Dimensions 5.25" form factor: 203mm (L) x 146mm (W) (7.9" x 5.7")
Environment Board level operating temperature:0°C to 60°C Storage temperature:-20°C to 80°C Relative humidity: 10% to 90% (Non-condensing)
Certifications CE approval FCC Class A
Add to Inquiry
Take a minute and tell us what you think!