Share this page

EBC 340

3.5" ECX On-board Intel® Atom™ N270 1.6GHz CPU with PCI 104/ Gigabit LAN/ CF
  • Main Feature
  • Support Intel® Atom™ N270 1.6GHz processor with 533 MHz FSB
  • Intel® 945GSE integrated 3D graphics engine GMA950 chipset with CRT and LVDS display
  • 1 x 200-pin SO-DIMM socket, up to 2GB single channel non-ECC 400/533 MHz DDR2 memory
  • Realtek RTL8111C-GR PCI Express Gigabit Ethernet x 1
  • Realtek ALC888 Audio CODEC x 1
  • USB 2.0 x 6, Serial port x 4, SATA x 1 and parallel port x 1
  • CompactFlash Socket x 1/PCI 104 Interface x 1
Add to Inquiry
Datasheet(PDF)
CPU Support Support Intel® Atom™ N270 1.6GHz processor with 533MHz FSB
Main Memory 1 x 200-pin SO-DIMM socket, up to 2GB non-ECC 400/533 DDR2 memory
Chipset Intel® 82945GSE Graphic Controller Hub (GMCH) Intel® 82801 GBM ICH7 Mobile (ICH7-M)
BIOS Award system BIOS Plug & Play support Advanced Power Management Advanced Configuration & Power Interface 8M bits SPI ROM
On-board LAN 1 x Realtek RTL8111C-GR PCI Express Gigabit Ethernet Support Boot From LAN (PXE) 1 x RJ45 with LED
Display Intel® 945GSE integrated 3D graphics engine, based on IntelGMA950 architecture, delivers sophisticated graphics for large display application, dual independent display support, at graphics core speeds up to 166MHz, provides a wealth of options for high-resolution displays Analog VGA interface: 1 x DB15 VGA port; Resolution up to 1600x1200 at 85 Hz, 2048x1536 at 75Hz LVDS interface: Support 18-bit single channel LVDS, resolution up to 1600 x 1200 CCFL interface: 1 x CCFL for LCD Panel Backlight Inverter
Audio Realtek ALC888 CODEC for High Definition 1 x Mic-in and 1 x Line-out Phone Jack
Expansion 1 x PCI104 slot
I/O Interface Serial port: 4 port, One DB9 Connector and Three 2x5 2.0mm box header serial, COM2 supports RS232/RS422/RS485 Parallel port: 1 x 26-pin box header USB 2.0: 6 ports, 2 ports edge connector, 2 ports by 2.0mm JST connector (2.0mm pin header option) 8 GPIO lines via header (GPI 0~3 and GPO0~3) TTL Level (0/5 V) On-board Power LED and HDD Active LED Pin Header 1 x 3-pin fan connector (for CPU) 1 x DB15 VGA connector 1 x Keyboard/Mouse pin header On board Buzzer/SMBus2.0/Reset SW
Watchdog Timer Watchdog timeout can be programmable by Software from 1 second to 255 seconds and from 1 minute to 255 minutes (Tolerance 15% under room temperature 25°C)
Storage 1 x SATA port 1 x CF socket 1 x uDOC (option)
System Monitor Monitoring of 4 voltages and 2 temperatures 4 Voltage (Vcore , +12V , +3.3V , +1.5V) 2 Temperatures (CPU, System)
On-board RTC On-chip RTC with battery backup 1 x External Li-Ion battery
Power Input Support AT mode only Support AT and ATX power supply 6-pin power connector for +5V/+12V power in 3-pin Jst connector with PS_ON# directly connected to GND for ATX power supply (Without power on push button function)
Power Requirements Power Requirement +5 V +12 V: Full-Loading Mode 1.26 0.66; Idle Mode 1.15 0.5; Standby Mode 0.86 0.41
Dimensions 3.5" ECX form factor 146mm (L) x 105mm (W) (5.7"x4.1")
Environment Operating temperatures: 0°C to 60°C Storage temperature: -20°C to 85°C Relative humidity: Operating 10% to 90%, non-condensing
Certifications CE approval FCC Class A
Add to Inquiry
Take a minute and tell us what you think!